Details

---

SHOPEE LINK

LAZADA LINK

PYE SURFACE JOINT COMPOUND is a premium and non-asbestos compound use

to align and form smooth finishes at joints areas. It can be used similarly to fill up

cracks, recessed areas and to embeded screw heads.

 

Application as Joint Finishing:

Application by trowel, scraper and blade knife by layers and subject to surface

conditions and strictly on dry surfaces. Apply first thin layer between the joint of

gypsum board and embed with joint tape. Allow it to dry before apply second coat.

Final coat shall apply with wider blade (10'') as to cover the joints & fasteners surfaces.

 

Application to Inside Corners/ Outside Corners Finishing:

Apply compound to both sides, fold tape along the centerline and press into

position. Remove the excess compound, than apply a thin finish layer over tape

for a smooth finish.

 

Coverage:

Depending as the thicknes applied and approximately 14g/1.8m-2.0m.

 

Storage:

* Keep away from direct exposure to sun

• Store at cool dry and well ventilated areas

• Lid to be tightly closed once opened.

 

Health and Safety:

Contacted with eyes rinse with plenty of water I irritation persists, seek medical

attention. In case with skin of irritation wash with large amounts of clean water with soap.