Details

---

SHOPEE LINK

LAZADA LINK

Rising Vehicle:

1. Make sure the jack and vehicle are on a hard level surface.

2. Always set the vehicle parking brake and block the wheels

3. Consult the owner's manual to location of jack points and position the jack under beneath the prescribed lift point.

4. Turn the release valve clockwise to the closed position. Do not over-tighten!

5. To raise the vehicle to the design height, place the handle in the socket and pump up and down.

6. Place the jack stand in the location recommended by the vehicle manufacturer. Do not get under the vehicle without a jack stand. Jacks are not designed to maintain heavy loads for long periods of time. Do not attempt to put the jack stand simultaneously under both ends of the vehicle or under one side of the vehicle.

7. Turn release valve Slowly counterclockwise to lower load onto jack stands