Details

---

SHOPEE LINK

LAZADA LINK

Preparation

*Surface must be sound,clean ,dust free and dry

*Use bituminous Flashband Primer to improve adhension on porous rough,dusty surfaces in cold or damp weather

*Porous surface-dampen lightly with water before applying

*Non-porous surfaces-should be dry or only very slightly damp

*Apply Flashbnd Primer with a water dampened brush.Allow to dry,but protect from rain or frost.

*Fill crack wider than 3mm,deep hollows or depressions

 

Application

*Cut Flashband to required length

*Remove the backing.Press flashband into place using fingertip pressure.Avoid excessive pressure.

*When laying adjacent rolls the flashband must overlap by lest 25mm

*Use a seam roller or rounded piece of wood to smooth ths.Flashband and ensure good contact is made